For safety

• Please read the instruction manual and understand how to use it properly.
• Please wear appropriate clothes and protective gear when you work.
• When working together with two or more people, make sure that each action is correct.
• Please check the condition of the universal joint before using it.
• Check the machine before using it (bolt, nut loosening, connection pin out, grease oil, etc.)
• When adjusting each part, turn off the P.T.O. clutch and engine.
• When folding, please check if there are no people around you before operating (folder type)

* Please check with your eyes before performing any tasks and make a warning sound.

• Please test drive for more than 5 minutes and check if there is anything wrong with the machine.
• Check the radius of rotation of the machine for human or other obstructions before working.
• Excessive operation and shock can cause mechanical failure.
• Remove and attach the universal joint after stopping the engine.
• Please do not board except for the control seat of the tractor.
• If something goes wrong with the machine, stop the engine and check it.
• If you are forced to leave the tractor during work, be sure to stop the engine and apply the parking brake.
  (If you don't have a parking brake, install a fastener before and after the wheel.)

• When driving on the road, disconnect the P.T.O. clutch and drive with the rotor down so that it does not touch the ground.
• Please drive at a safe speed while driving.
• Please make sure to put on a glow-in-the-dark sign when driving at night.

• After finishing the work, wash it with water, dry it, check it thoroughly, and make up for the shortage of oil.
  (Please check it so that it doesn't interfere with your next use.)
• Please support the machine so that it doesn't fall.
• When storing for a long time, use a protective cover to keep it from snow or rain.

• Check the height of both skids.
• If the tractor's driving power is insufficient, please proceed slowly.
• If the ground is too hard, work two or three times.
• If the blade can't dig into the ground, please proceed slowly.

• Please lift the rotavator.
• Please trcator proceed faster.

• Lower the leveling blade.
• Please tractor proceed slowly.
• Please avoid working in humid places.
• In a machine equipped with a leveling bar, raise or lower the leveling bar so that the soil is close to the blade.

• Please avoid working in humid places.
• Please turn up the rotavator.
• Please tractor proceed slowly.
• Reduce the number of blades of the flange from six to four. (only available on four or six blades)‌
• Avoid cultivation in areas with long grasses and clean the residue on both sides of the blade shaft to prevent overheating.

• Please check if there are any foreign substances between the blades.
• Make sure that the blade is incorrectly assembled and cannot form a spiral shape or hit the blunt ground first.
• Please check if the blade is worn or damaged.
• Please check if the blade shaft is deformed due to the impact of foreign substances during the work.

• Please do the ascending work.
• Don't step along the contour line and do the ascending and descending work.

• Overwork, patients, medication, or other reasons that they cannot concentrate on their work
• After drinking
• Pregnant female driver)
• People under the age of 18 (minor)
• Unskilled person using a machine

• Don't work with headbands, towels, etc.
• Wear helmet anti-slip shoes and do not wear loose clothing.

* If you don't follow the rules There's a risk of getting caught in the machine or slipping.

• Explain how to handle it, hand over the [Manual] before using it, and make sure to understand it.

* If you don't follow the rules Risk to cause death or injury accidents, a mechanical breakdown.

• Be sure to read and understand the instructions for the tractor before installing it on the tractor

* If you don't follow the rules There is a risk of injury or damage.

• When the machine is released from the tractor, it can cause injury due to crushing, stenosis, entanglement and shock.
• When connecting the machine, make sure that the upper and lower link pins are not defective every time you connect the machine.

* If you don't follow the rules There is a risk of injury or damage.

• When installing heavy work tools or accessories on the tractor, attach the balance weight of the tractor manufacturer and adjust the balance.

* If you don't follow the rules There is a risk of injury or damage.

• Do not drive on public roads with tractor machines fitted.
• Please don't remove and attach work machines on public roads.

* If you don't follow the rules It's a violation of the Road Act Please observe road traffic laws when driving on the road.

• Do not modify the machine arbitrarily.
  (Not covered by warranty.)
• Do not use other than genuine parts or designated parts.

* If you don't follow the rules Risk of accident or mechanical failure.

• Used by a person who is not properly trained
• Invalid use
• Damage due to faulty power supply and malfunction of the machine
• Incorrect machine assembly, operation, handling
• Poor maintenance or cleaning
• Unauthorized modification or processing
• Use parts from non-standard or unspecified models
• If you do not follow the instructions
• Use in violation of the law
• Disasters and natural disasters
• The impact of external matter
• Management defects in worn machine parts